The Mini Clearvision door is unique in that the Curtain is transparent. It is suitable for smaller compartments or cabinets with minimal head room and where vision into the cabinet is required. The Slats are not sealed therefore the door is recommended for interior use or exterior use where there is limited exposure to the elements.

Applications include, but are not limited to, emergency vehicles, ambulances, maintenance vehicles, equipment trailers and vending trailers.

Features & Benefits

Curtain – Constructed using 1 1/2″ UV stabilized polycarbonate with a 1/2″ aluminum joinery section. Slats are locked into position with nylon End Clips.
Bottom Rail – 2 inch extruded aluminum complete with or without a Finger Rail. A Bottom Seal can be added as an extra.
Side Guides/Track – Side Guides are 1″ X 5/8″ extruded aluminum U-channel.
Counterbalance – For Roller assisted operation, the Counterbalance consists of a 3/4″ diameter hollow shaft, mill aluminum 3″ tube, nylon cores, and an appropriately engineered/sized spring for the application.
Operation – Hand operated by lifting the Bottom Rail to open and pulling down the Bottom Rail to close the door.
Door Locking – Flush cylinder lock (key operated) or T handle (keyed or non-keyed).
Joiners – Normal finish is a clear anodized finish. Slats can be provided in a mill finish for customer painting or, for an additional charge, entire door can be powder coated to customer specified color. Wet paint is also available at additional cost.

Technical Specifications

Product Details

70″ Wide X 80″ High (Roller Assisted). Consult a sales representative for all applicable sizes.

Alternative Configurations

Sliders (no Counterbalance) – refer to Sliding Door configuration drawing in “Technical Information” section.
Electric Operation – using a tube motor (available in 12V DC / 120V AC / 240V AC). Refer to Tube Motor drawing in “Technical Information” section.

Product Downloads

Need Additional Product Information

We have the most up to date product specifications on this product

View Product on Manufacturer Site

Request additional information

Ready to inquire about this product?

Request a quote

Commercial
Mini Clearvision Roll-Up Door

Features & Benefits

Curtain – Constructed using 1 1/2″ UV stabilized polycarbonate with a 1/2″ aluminum joinery section. Slats are locked into position with nylon End Clips.
Bottom Rail – 2 inch extruded aluminum complete with or without a Finger Rail. A Bottom Seal can be added as an extra.
Side Guides/Track – Side Guides are 1″ X 5/8″ extruded aluminum U-channel.
Counterbalance – For Roller assisted operation, the Counterbalance consists of a 3/4″ diameter hollow shaft, mill aluminum 3″ tube, nylon cores, and an appropriately engineered/sized spring for the application.
Operation – Hand operated by lifting the Bottom Rail to open and pulling down the Bottom Rail to close the door.
Door Locking – Flush cylinder lock (key operated) or T handle (keyed or non-keyed).
Joiners – Normal finish is a clear anodized finish. Slats can be provided in a mill finish for customer painting or, for an additional charge, entire door can be powder coated to customer specified color. Wet paint is also available at additional cost.