5100 Series Sliding Doors All record-USA Series 5100 automatic sliding entrances allow the sliding doors to break away and swing in the direction of egress when force is applied. The doors can be pushed to swing at any point in the door opening or closing cycle (except for Reverse Breakout units), and the force required to break the doors away is mechanically adjustable. On units with exterior swing-out sidelights, breaking the doors away will also cause the sidelights to swing in the same direction as the sliding doors. These units also incorporate mechanical interlocks that lock the sliding doors and sidelights together when the doors are fully closed. record-USA utilizes 1 3⁄4” x 4 1⁄2” framing for the side jambs and transom members on all sliding entrances. Where applications require, optional 1” x 4 1⁄2” or 4 1⁄2” x 4 1⁄2“framing may be substituted. On telescope, full pocket, and surface mount units, 1 3⁄4 x 6 1⁄2” framing is standard with optional 1’ x 6 1⁄2” framing also available. On surface mounted units, 1 3⁄4” x 2 3⁄4”(narrow stile) or 1 3⁄4” x 4 1/4” (medium stile) filler tubes are mounted against the wall or storefront in place of sidelights to provide a weather seal and members to mount the safely beams.

Technical Specifications

Product Details

Electric Locking: Concealed electric locks are available in both fail safe (unlock on loss of power )and fail secure (lock on loss of power) operation. The electric locks are mounted in the header and operate as a carriage lock that automatically locks the door against slide after each open-close cycle or can be unlocked for daytime use and locked at night.
Battery Pack: A constant charge battery pack is available for use with building alarm and security systems to ensure that entrances are secured in an emergency. The battery pack can be provided to open or close the door upon loss of incoming electrical power or when signaled from the security system. An UPS (uninterruptible power supply) that provides 300 door opening cycles is also available.
Exit Devices: Recessed vertical rod exit devices are available on inside slides as well as outside slides. These devices extend across the full width of the door panel. Exit devices are mounted at the same height as the muntin bar (41-5/8” from the floor or threshold to the centre line of the exit device/muntin bar.)
Partial Open Feature: A selectable partial opening feature is available for applications that require a full width opening during pleasant weather conditions but a partial opening during harsh weather. The microprocessor-based operator control offers an infinite number of partial opening settings. The partial opening can be constant or automatic depending on traffic volume. In the automatic mode during high traffic conditions, the control will override the reduced opening setting and open the door to the full opening available. Once traffic decreases, the control will return to the reduced opening.
S.M.A.R.T. Panel
- The 5100 introduces a new control panel with an intuitive interface and visual feedback of door status. Selecting the operational mode of the door is a single button press, and the built-in display will provide confirmation.
- The control panel can be manually locked, preventing unauthorized alteration by those who don't have permission to adjust the door.
- Two control panels can be installed on the same door; one at the unit and one remote.
- The control panel will automatically provide an alert message if an abnormal condition occurs.
- Provides the user with the phone number of the authorized service agent.
- Reminds you of your commitment in performing a daily safety check.
- Provides information regarding objects in track that may negatively impact the operation of the door.
- Displays current door setting in regard to traffic selection and egress. Indicates when a door has been accidentally broken out.
- Identifies if a safety beam has failed or been damaged.
- Notifies user of which part needs replacement.